Sena SPH10 - Delete All Bluetooth Pairing Information; Exit Voice Configuration Menu

21
SPH10
English
9.6 Delete all Bluetooth Pairing Information
Voice Prompt
“Delete all pairings”
Factory Default N/A
Execute Tap the Phone Button
To delete all Bluetooth pairing information of the
SPH10, rotate the Jog Dial until you hear a voice
prompt saying “Delete all pairings”, and tap the
Phone Button to confirm. Taping the Jog Dial is not
available for this setting.
9.7 ExitVoiceCongurationMenu
Voice Prompt
“Exit conguration”
Factory Default N/A
Execute Tap the Phone Button
To exit voice configuration menu and get back to
stand-by mode, rotate the Jog Dial until you hear a
voice prompt saying “Exit conguration”, and tap
the Phone Button to confirm. Tapping the Jog Dial is
not available for this setting.
Rotate Jog Dial
Tap Phone
Button
Tap Jog Dial
Speed Dial Execute N/A
VOX Phone Enable Disable
VOX Intercom Enable Disable
Voice Prompt Enable Disable
Sidetone Enable Disable
Delete All Pairings Execute N/A
Exit Configuration Execute N/A
Voice Conguration Menu & Button Operations