Sena SPH10 - Wearing and Fitting the Sena SPH10; Microphone Installation

7
SPH10
English
3. WEARING THE SPH10
3.1 Microphone Installation
Two microphones are included in the package: a
long-boom microphone for high noise environment
and a short microphone for indoor use.
Plug the microphone into the microphone port to fit triangle
marks as described in the below picture. Adjust the
direction of the long-boom microphone so that the
“II” mark on the microphone is pointing towards your
mouth.
• Boom Microphone
• Mini Microphone
• USB Power & Data Cable
• Stereo Audio Cable
• Boom Microphone Sponges
• Mini Microphone Sponges
• Rubber Earpads