Sena SPH10 - Speed Dialing

25
SPH10
English
12.2 Speed Dialing
You can quickly make a phone call by using the voice
speed dial menu.
1. To enter into the voice speed dial menu, double tap
the Phone Button and you will hear a mid-tone single
beep and a voice prompt saying “Speed dial”.
2. Rotate the Jog Dial clockwise or counter-clockwise
to navigate between the menus. You will hear voice
prompts for each menu items.
3. Tap the Phone Button or the Jog Dial to select a
voice menu among the followings:
(1) Last number redial (4) Speed dial 3
(2) Speed dial 1 (5) Cancel
(3) Speed dial 2
4. After selecting the last number redial menu, you
will hear a voice prompt saying “Last number
redial”. Then, to redial the last phone call number,
tap the Phone Button or the Jog Dial.
5. To call one of the speed dials, rotate the Jog
Dial clockwise or counter-clockwise to navigate
between the menus until you hear a voice prompt
saying “Speed dial (#)”. Then, tap the Phone
Button or the Jog Dial.
6. If you want to exit the speed dial immediately,
rotate the Jog Dial until you hear a voice prompt
saying “Cancel”, and tap the Phone Button or the
Jog Dial. If any button is not pressed within 15
seconds, the SPH10 will exit the voice speed dial
menu and goes back to stand-by mode.
Note:
Make sure that you should connect the mobile phone
and the headset in order to use the speed dial function.
Answer Tap Phone Button or Tap Jog Dial or
Say “Hello”
End Tap Phone Button or Press Jog Dial
for 2”
Reject Press Jog Dial for 2”
Transfer Press Phone Button for 2”
Call Use phone keypad
Speed Dial Double tap Phone Button
Voice Command Tap Phone Button
Mobile Phone Call Button Operations