When the Battery Is Removed
Ensure the battery is turned off whenever it is being removed or off the bike.
Be careful not to drop or damage the battery when lifting the battery off the frame or while loose from the bike.
Do not touch or damage the “+” and “-” terminal contacts on the bottom of the battery and keep them clear of debris.
Do NOT operate the bike with the electrical system in the on position, or damage to the electrical system can occur.
Use caution to avoid damage to battery connector terminals, which are exposed when the battery is unlocked and
removed from the frame of the bike. In the case of damage to the terminals or battery mounts, please discontinue use
and contact Senada Bikes Product Support immediately.
When Installing the Battery onto the Bike
Ensure the battery is off before sliding the battery onto the frame mount receptacle.
Do not force the battery onto the receptacle; slowly align and gently push the battery down into the receptacle.
Ensure the battery has been properly secured to the bike before each use by carefully pulling upward on the battery with
both hands to test the security of the attachment of the battery to the mount once locked.
To Next Page
Loading...