Battery Charge Level Indicator
The LCD display on the handlebars of your bike from Senada Bikes features a battery charge level indicator (like a fuel gauge on
a car). This indicator calculates battery life based on the battery power output (instantaneous voltage reading) and can
fluctuate while riding if power demand and/or output changes. Once one bar is left on the display, users should charge the
battery as soon as possible. At lower states of charge, the bike may limit power output to prevent damage to the battery.
Best Practices for Extending Range and Battery Life
Notice: Follow the best practices listed below to help extend your range and battery life.
Whenever possible, avoid applying full throttle when the bike has slowed to very low speeds, has stalled, or stopped.
Pedal to assist the motor when climbing hills and accelerating from a stop.
Reduce your power consumption whenever possible.
Do not climb hills steeper than 15% in grade.
Avoid sudden starts and stops.
Accelerate slowly.
To Next Page
Loading...