5.Select the desired level of pedal assistance (PAS) between level 0 through 5 using the up and down arrows on the
display remote.
Level 1 corres
p
onds to the lowest level of
p
edal assistance, and level 5 corres
p
onds to the
hi
g
hest level of
p
edal assistance. Level 0 indicates pedal assistance is inactive. Start in PAS
level 0 or 1 and
adjust
from there.
6.Begin riding carefully. With the proper safety gear and rider knowledge, Press the red button and you may now
operate
your bike from Senada Bikes. On a flat surface, in a low gear (1 or 2), most riders should be able to begin pedaling the
bike with pedal assist level 0 or 1. You may also use the throttle to accelerate and maintain
your
desired speed.
7 T
.
he throttle is used by slowly and carefully rotating the throttle backward, toward the rider. Do not use the
throttle unless you are on the bike.If LCD shows ERROR 08,please press the red button.
Do not use the throttle while dismounted. Avoid accidental application of the throttle while dismounted;
anytime
you are moving the bike while dismounted, ensure the bike is powered off to prevent accidental
application of the
throttle.
Brake Light Features and Operations
Your ebike by Senada Bikes comes equipped with a dry cell tail light. Pull out the Plastic film when you are ready to use.
Battery Key Function
The key serves to lock and unlock the battery to the frame only, the key is not an ignition switch
To Next Page
Loading...