Charger Safety Information
The charger should only be used indoors in a cool, dry, ventilated area, on a flat, stable, hard surface.
Avoid charger contact with liquids, dirt, debris, or metal objects. Do not cover the charger while in use.
Store and use the charger in a safe place away from children and where it cannot suffer damage from falls or impact.
Fully charge the battery before each use to ensure it is ready to go the full range per charge, to extend the life of the
battery, and help reduce the chance of over-discharging the battery.
Do not charge the battery with any chargers other than the one originally supplied from Senada Bikes or a charger
designed for use with your specific bike purchased directly from Senada Bikes.
The charger works on 110/220 V 50/60 Hz standard home AC power outlets and the charger automatically detects and
accounts for incoming voltage. Do not open the charger or modify voltage input.
Do not yank or pull on the cables of the charger. When unplugging carefully remove both the AC and DC cables by pulling
on the plastic plugs directly, not pulling on the cables.
Charge the battery only with the charger originally supplied with the bike from Senada Bikes, or a charger purchased
directly from Senada Bikes, designed for use with your specific bike serial number, as approved by Senada Bikes. Never
use an aftermarket charger, which can result in damage, serious injury, or death.
Please take special care in charging your bike from Senada Bikes in accordance with the procedures and safety
information detailed in this manual. Failure to follow proper charging procedures can result in damage to your bike,
the charger, or personal property, and/or cause serious injury or death.
To Next Page
Loading...