Quick Release Levers
Quick release levers are located on your ebike for securing the seatpost
.
Th
is
provide
convenience to the user since they allow
the seatpost to be adjusted without tools. Since quick release levers can be loosened during transportation,
or accidentally
between or during rides, it is important that you
regularly check to ensure these components are properly secured.
Accessories, Straps, and Hardware
Ensure all hardware is secured and all approved accessories are properly attached per the specific component manufacturer’s
instructions. It is good practice to look over all hardware, straps, and accessories before each ride and if you do discover
something is wrong or find something you are not sure about, have it checked by a certified, reputable bike mechanic.
Suspension, Handlebar, Grips, and Seat Adjustments
The suspension fork on your ebike will affect the handling of the bike
,
you need to understand how it works before use. The
suspension fork should be properly adjusted for your weight and terrain. Ensure the handlebar and handlebar stem are properly
aligned, fitted to the user, and secured to their recommended torque values. Handlebar grips should not move easily on the
handlebar end. Loose, worn, or damaged handlebar grips should be replaced before you ride and can be purchased from
Senada Bikes. The seat and seatpost should be properly aligned, fitted to the user, and the seatpost quick release should be
properly tightened, fully closed, and secured before riding.
Battery Charged, Secured, and Unplugged
Ensure the battery is adequately charged and operating properly. The battery gauge on the LCD display and charge status
indicator on the battery should read similarly. Ensure the battery charger is unplugged from the outlet, battery, then stored in a
safe location before you ride.
To Next Page
Loading...