Start-Up Procedure
After the bike has been properly assembled if all components are secured correctly, and you have read this entire manual,
you may turn the bike on and select a power level following the steps outlined below:
1.
Test the battery lock security.Ensure the key port is aligned in the “lock”position.
2.Ensure proper handlebar and seat adjustment of the bike to the rider.For details see the “adjusting the seatheight” and
“adjusting the seat position and angle” section.Ensure the handlebar faceplate bolts and seatpost quick release are fully and
properly secured.
3.Turn on the bike.Insert the key and turn clockwise to the open circle icon of “on,locked” position,as shown.Remove the key by
pulling directly backward without twisting so the key barrelremains in the on,locked pisition.
Press and hold the M button for 3 seconds and turn on the ebike.
4.Turn on the headlight,press and hold the UP arrow for 3 seconds.
To Next Page
Loading...