EasyManua.ls Logo

SENADA SABER - Page 42

Default Icon
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
41
Tire Inflation and Replacement
SABER and
HERALD
employs 26’’ x 4’’ rubber tires with inner tubes. The tires are designed for durability and safety for
regular cycling activities and to be checked before each use for proper inflation and condition. Proper inflation, care, and timely
replacement will help to ensure that your bike’s operational characteristics will be maintained, and unsafe conditions avoided.
Senada Bikes recommends 20 psi/1.4 bar for the stock tires on SABER and HERALD.Always stay within the manufacturer’s
recommended air pressure range as listed on the tire sidewall.
It is critically important that proper air pressure is always maintained in pneumatic tires. Do not underinflate or overinflate your
tires. Low pressure may result in loss of control, and overinflated tires may burst. Failure to always maintain the air pressure
rating indicated on pneumatic tires may result in tire and/or wheel failure.
Inflate your tires from a regulated air source with an available pressure gauge. Inflating your tires from an unregulated air source
could overinflate them, resulting in a burst tire.
Even tires equipped with built-in flat-preventative tire liners, like those that come with bikes by Senada Bikes, can and do get
flats from punctures, pinches, impact, and other causes. When tire wear becomes evident or a flat tire is discovered, you must
replace the tires and/or tubes before operating the bike or injury to operators and/or damage to your bike could occur.
When changing a tire or tube, ensure that all air pressure has been removed from the inner tube prior to removing the tire from
the rim. Failure to remove all air pressure from the inner tube could result in serious injury.
Using aftermarket tires or inner tubes, not provided by Senada Bikes may void your warranty, create an unsafe riding
condition, or damage to your bike by Senada Bikes. If required by law, ensure replacement aftermarket tires have sufficient
reflective sidewall striping.
For more information on tire or tube replacement procedures, or questions about tire inflation, visit
SenadaBikes.com and contact Senada Bikes Product Support.

Related product manuals