Sencore SMD 989 - Events

SMD 989– User Manual
Page 92 (105)
EVENT SELECT
↕

>DATE/TIME CHANGE – UNIT
UNIT BOTUP – UNIT
UNIT SHUTDOWN – UNIT
10 MHZ REFERENCE CHANGE – UNIT
NTP UPDATE - UNIT
DATE/TIME CHANGE
↕

>LOGGING: ENABLED
SNMP TRAP: DISABLED
RELAY: RELAY 1
RELAY ACTIVATION: DISABLED
REALY DURATION: 0100 MS
EVENT LOGS
↔↕

>130 2010/08/25 UNIT BOOTED
129 2010/08/25 IF OUTPUT: NOTM
128 2010/08/25 IF OUTPUT: MUTED
127 2010/08/25 ASI TS: ABSENT
Events
Each possible event is configurable to be enabled or
disabled if the user does not want it to be logged. An
alarm can be disabled and a SNMP trap can still be
enabled to be generated for an event.
Name
Description of Event
10MHz Ext. Ref Clock Change
Indicates the external reference clock was not present
Date/Time Change
The unit’s date/time has been changed
NTP Update
The unit’s date/time was updated by the NTP server
Software update failed
The unit failed to update the software
Software update succeeded
The unit successfully completed a software update
Unit Bootup
The unit has been loaded
Unit Shutdown
The unit was shutdown
ASI TS Sync Error
No ASI Sync with TS Input has been detected
Figure 84: Event descriptions