9
MP3/WMA Playback
Exit Pair
After pai r s ucc ess ful ly, if you wa nt to
disconnect, press and hold SRC button to
disconnect Bluetooth connection.
Ifyouwanttore-connect,pressandholdSRC
button.
Make a call
1. Press SRC button to select BT MUSIC
mode.
2. Press
button.
3. Rotate the VOL knob to select from the
following list:
DIAL NUML dial number directly
DIALLED: dialed number
MISSED: missed call
RECEIVED: received call
ME PBK: Phone directory
SIM PBK: SIM directory
4. Pre ss MEN U bu tto n to co nfi rm t he
selection.
Todialanumberdirectly,selectDIALNUM.
1. Rotate the VOL knob to select phone
number,pressMENUbuttontoconrm.
- Press
button to delete a digit inputted.
- Pres s
but t o n to r e s et ent e r ed
number.
2. Press
to dial out.
Bluetooth Operation
Note:
Foryoursafety,avoidtalkingonthephoneas
much as possible while driving.
Bluetooth is a wireless transmission way
for short distance. The built-in Bluetooth
can connect with the mobile phones having
Bluetooth function.
Afterconnecting,youcancontrolyourmobile
phone through the unit.
Pairing
Use this function to establish a connection
between the unit and your mobile phone.
1. Turn on the unit.
2. Turn on Bluetooth function of your mobile
phone, keep phone within 3 meters to
the unit and start to search for Bluetooth
devices.
3. After the name of the Bluetooth module
“CMB747”appearson thepairinglist of
yourmobilephone,selectit.Atthistime,a
pairing code is required. Enter the pairing
code "0000", and the Bluetooth pairing
will process automatically. Some mobile
phones may instruct you to select connect
ordisconnect,pleaseselectconnecting.
Make sure that when MP3 CD-R is burned
that it is formatted as a data disc and NOT
as an audio disc.
You should not write non-MP3 files or
unneededfoldersalongwithMP3leson
the CD-R otherwise it takes a long time
until the unit starts
toplayMP3les.
With some CD-R media, data may not
be properly written depending on their
manufacturing quality.In this case, data
may not be reproduced correctly. High
quality CD-R disc is recommended.
Up to 16 characters are displayed for the
name of an Album or a Track. ID3 TAG
version 1.x is required.
Note that the unit may not play tracks in
the order that you wrote them to the disc.