SYNC CLOCK WITH TIME INTERNET
Allows you to enable date/time updating via connection to NTP servers (RFC 5905).
ATTENTION!
AT EACH RESTART THE DEVICE MUST BE ABLE TO RETRIEVE THE DATE/TIME FROM AN NTP
SERVER OTHERWISE THIS WILL BE SET TO 1/1/1970 0:00
NTP SERVER 1 ADDRESS
This is the IP address of the first NTP server (for example 193.204.114.232 for INRIM's NTP)
NTP SERVER 2 ADDRESS
This is the IP address of the second NTP server (in case the first one does not respond)
GMT
Sets the offset from Greenwich Mean Time (for example for Italy GMT=+1 when daylight saving time is not in
effect)
IEC MODEL NAME
Sets the model name for the IEC protocol
IEC DEVICE NAME
Sets the device name for the IEC protocol
IEC61850 SERVER TCP/IP PORT
Sets the TCP-IP communication port of the IEC61850 protocol
In addition, a configuration can be exported / imported via the webserver.