EasyManua.ls Logo

Seneca R-KEY-LT - General Device Description; Modbus Ethernet to Serial Mode

Seneca R-KEY-LT
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User Manual
R-KEY-LT
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION MAY
BE REPRODUCED WITHOUT PRIOR PERMISSION.
www.seneca.it
Doc. MI004870-EN
Rev. 1.0.0.0
1.3. DESCRIPTION
R-KEY-LT is a Modbus RTU/ASCII Gateway with a RS232/RS485 port and a Fast Ethernet 10-100MBits.
An internal Webserver is also available for configuration and real time values view.
R-KEY-LT is configurable in 2 different modes:
Modbus Ethernet to Serial (From Modbus TCP-IP to Modbus RTU/ASCII)
Modbus Serial to Ethernet (From Modbus RTU/ASCII to Modbus TCP-IP)
1.4. MODBUS ETHERNET TO SERIAL
In this scenario a Modbus TCP-IP master is connected with ethernet to R-KEY-LT, one or more serial Modbus
slaves (for example the Z-PC Seneca Series) are connected to the serial port.
A typical LAN connection is represented into this figure:
Also a communication with multiple clients is possible (Max 8 clients for device):

Other manuals for Seneca R-KEY-LT