Sennheiser EK 2000 - Adjusting settings via the operating menu; Synchronizing a transmitter with the diversity receiver - “Sync”

18
Using the operating menu
Working with the operating menu
By way of example of the “Frequency Preset” menu, this section describes
how to use the operating menu.
Changing from a standard display to the operating menu
Selecting a menu item
Changing and storing settings
If the lock mode is activated, you have to deactivate it In order to
be able to work with the operating menu (see page 13).
왘 Press the SET button.
The current standard display is replaced by the main menu.
The last selected menu item is displayed.
왘 Press the rocker button to change to the “Frequency Preset”
menu item.
The current setting of the selected menu item is displayed:
왘 Press the SET button to call up the menu item.
왘 Press the rocker button to set the frequency bank.
왘 Press the SET button to confirm your selection.
왘 Press the rocker button to set the channel.
왘 Press the SET button to store the setting.
SET
Menu
Frequency Preset
B.Ch: 1. 1
Menu
B.Ch: 1. 1
Frequency Preset
B.Ch:
Frequency Preset
B.Ch:
Frequency Preset
“Stored”
SET
SET
SET
863.100MHz
1. 1
6. 3
824.500MHz
Call up “Frequency
Preset”
Select the frequency
bank and confirm
Select the channel;
store the setting
SET
SET
SET