EasyManua.ls Logo

Sennheiser EK 2000 - Putting the diversity receiver into operation; Inserting the batteries;accupack; Charging the accupack

Sennheiser EK 2000
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Putting the diversity receiver into operation
Putting the diversity receiver into
operation
Inserting the batteries/accupack
For powering the diversity receiver, you can either use two 1.5 V AA size
batteries or the rechargeable Sennheiser BA 2015 accupack or the DC 2
power adapter (see “Accessories” on page 35).
Open the battery compartment by pushing the two catches in the
direction of the arrows and open the cover .
Insert the two batteries or the accupack as shown above. Please
observe correct polarity when inserting the batteries/accupack.
Close the battery compartment by pressing on the center of the
cover .
The battery compartment cover locks into place with an audible
click.
Charging the accupack
To charge the BA 2015 accupack:
Insert the diversity receiver into the L 2015 charger (see “Accessories”
on page 35).
The L 2015 charger can only charge the combination BA 2015
accupack/diversity receiver. Standard batteries (primary cells) or
individual rechargeable battery cells cannot be charged.

Other manuals for Sennheiser EK 2000

Related product manuals