Sennheiser EK 2000 - Page 9

8
Product overview
햷 Battery status Charge status:
approx. 100%
approx. 70%
approx. 30%
charge status is critical, the red
LOW BATT LED 쐏
is flashing :
햸 Muting function
“MUTE”
“Mute” is only displayed on the “Frequency/
Name” standard display (see page 13) when
the transmitter’s RF signal is deactivated.
The diversity receiver does then not output
an audio signal.
or line output level
AF OUT
The line output level AF OUT is only
displayed on the “Frequency bank/Channel/
Name” standard display (see page 13).
햹 Pilot tone “P” Activated pilot tone evaluation
(see page 27)
Display Meaning
쐏