29
Adjusting settings via the operating menu
Via the “Sync” menu item, you can transfer the parameters from the
receiver to the transmitters via the infra-red interface (see page 19).
Display Function Settings
Sensitivity Adjusts the input sensitivity:
SK –60 dB to 0 dB,
adjustable in steps of 3 dB
SKM and SKP –48 dB to 0 dB,
adjustable in steps of 6 dB
Low Cut
(SKM only)
Low cut filter
/
Auto Lock Lock mode Inactive, Active
Mute Mode
(SK, SKP only)
Mute mode Disabled, RF On/Off,
AF On/Off
RF Power Transmission power Low, Standard, High
PhantomPower48V
(SKP only)
Phantom powering Inactive, Active
Cable Emulation
(SK only)
Emulates guitar cable
capacities
Minimum, Low, Medium,
High
To Next Page
Loading...
