SENNHEISER ELECTRONIC GMBH & CO. KG
COMPONENT MAINTENANCE MANUAL
HMEC 26 SERIES
Page 2
Feb 10/10
23-41-48
The difference between the headset assemblies of the HMEC 26 series are the Cables that are connected
to them. Table 1 gives the functions of the different headset assemblies.
MODEL NO. DESCRIPTION PART NUMBER
HMEC 26 NoiseGard™ headset with a pre-polarized condenser microphone 026-35
HMEC 26-T NoiseGard™ headset with a pre-polarized condenser microphone
with Talk Through function (with Talk Through button at the non microphone side cap)
026-C5
HMEC 26-CP Aircraft powered NoiseGard™ headset with a pre-polarized condenser microphone
with a Cable, an XLR-5 connector and a control unit to switch NoiseGard™ on/off
026-35-999-3211
HMEC 26-V-CP Aircraft powered NoiseGard™ headset with a pre-polarized condenser microphone
with a Cable, an XLR-5 connector, a control unit to adjust the volume and switch
NoiseGard™ on/offand an L/R boom switch
026-35-999-3251
HMEC 26-KP Aircraft powered NoiseGard™ headset with a pre-polarized condenser microphone
with a Cable, a 6.3 mm stereo jack (PJ-055 equivalent), a PJ-068 microphone jack
equivalent and a control unit to switch NoiseGard™ on/off
026-35-999-3111
HMEC 26-V-KP Aircraft powered NoiseGard™ headset with a pre-polarized condenser microphone
with a Cable, a 6.3 mm stereo jack (PJ-055 equivalent), a PJ-068 microphone jack
equivalent, a control unit to adjust the volume and switch NoiseGard™ on/off,
a mono/stereo switch and an L/R boom switch
026-35-999-3161
HMEC 26-BV-K Battery powered NoiseGard™ headset with a pre-polarized condenser microphone
with a Cable with a 6.3 mm stereo jack (PJ-055 equivalent), PJ-068 microphone jack
equivalent, a control unit to adjust the volume and switch NoiseGard™
on/off, a mono/stereo switch, an L/R boom switch, an Auto Shut-Off function, a
3.5 mm jack socket for an external audio unit and a 2.5 mm jack socket for a mobile
phone
026-35-999-1171
HMEC 26-B-CP Aircraft or battery powered NoiseGard™ headset with a pre-polarized condenser
microphone with a Cable, an XLR-5 connector, a control unit to switch
NoiseGard™ on/off and an Auto Shut-Off function
026-35-999-2291
HMEC 26-BV-CP Aircraft or battery powered NoiseGard™ headset with a pre-polarized condenser
microphone with a Cable, an XLR-5 connector, a control unit to adjust
the volume and switch NoiseGard™ on/off, an L/R boom switch and
an Auto Shut-Off function
026-35-999-2281
HMEC 26-B-K Battery powered NoiseGard™ headset with a pre-polarized condenser microphone
with a Cable, a 6.3 mm stereo jack (PJ-055 equivalent), a PJ-068 microphone jack
equivalent, a control unit to switch NoiseGard™ on/off and
an Auto Shut-Off function
026-35-999-1191
Table 1
Equipment Headset covered
Oct 30/08
To Next Page
Loading...
