Sennheiser Set 830 S - Connecting Accessories to the Receiver

11
Putting the Set 830 S into operation
Connecting headphones or the induction loop for
hearing aids to the receiver
The socket 7 of the receiver allows you to connect
• the supplied induction loop
Q,
• headphones or
• a connection cable to your hearing aid.
Connecting the induction loop
왘 Carefully remove the clip O from the receiver.
왘 Attach the clip of the induction loop as shown.
왘 Connect the induction loop Q to the socket 7 of the
receiver.
왘 Set your hearing aid to position “T”.
If your hearing aid has no position “T”, please contact your
hearing aid acoustician.
Note:
For alternative connection possibilities to your hearing
aid as well as the connection to cochlea implants, please
contact your hearing aid acoustician.
7
Q