Sennheiser Set 830 S - Connecting the Transmitter to the Mains; Using the Set 830 S System; Switching the System On and Off

10
Putting the Set 830 S into operation
Connecting the transmitter to the mains
– If there is no audio signal from the sound source
for about 3 minutes, the transmitter automatically
switches off. The operation indicator goes off.
왘 Select the suitable country
adapter
N for your wall
socket.
왘 Slide the supplied country
adapter onto the mains
unit M.
왘 Connect the yellow connector
of the mains unit to the yellow
socket H of the transmitter.
왘 Plug the mains unit M into a
wall socket.
The operation indicator B
on the transmitter lights up
green.
Notes:
– When connecting the transmitter to the mains
for the first time, charge the rechargeable
battery for 3 hours as described in the chapter
“Storing and charging the receiver” on
page 19.
EU
UK
US
N
M
H
M
3h