9
Putting the Set 830 S into operation
Connecting the transmitter to a SCART socket
Note:
If your TV has several SCART sockets, use the socket
SCART output.
Using the MKE 800 TV-N external microphone
What if your sound source doesn’t have any of the connec-
tions mentioned above?
You can then use the optional MKE 800 TV-N microphone
(see page 30).
What if your sound source mutes the external loud-
speakers if you use one of the connections mentioned
above?
왘 Via the operating menu of your TV, check if the muting
can be deactivated.
왘 If the muting persists, use the optional MKE 800 TV-N
microphone (see page 30) instead of the connection
cable.
To connect the MKE 800 TV-N microphone:
왘 Directly connect the microphone to the blue socket E of
the transmitter.
왘 Position the microphone in front of the loudspeaker of
your sound source.
Note:
You can change the sound by varying the position of the
microphone in front of the loudspeaker.
왘 Plug the SCART adapter L
onto the connection cable I.
왘 Connect the SCART adapter L
to the SCART socket on your
TV.
To Next Page
Loading...
