Sennheiser Set 880 - Connection possibility A: optical (digital)

Putting the Set 880 into operation
Set 880 | 11
Connection possibility A: optical (digital)
To achieve the best possible listening experience, connect the
transmitter to your TV or hi-fi system using the supplied opti
-
cal digital cable.
Note that your wireless headphone system only supports dig-
ital signals coded in the PCM format. Information on how to set
the audio format of the connected audio source to PCM can be
found in the Sound menu or in the instruction manual of your
device.
If an incompatible digital audio signal is being received, the
Transmitter status LED flashes white and blue. Audio playback
is not possible.
* The appearance of the Sound menu can vary depending on
the device you are using.
b Connect the optical digital cable to the pink Digital Optical
In
audio input of the transmitter and to the optical output of
your audio source.
A
A
S
o
und
m
e
n
u
*
D
igital sound output
Bi
tstream
P
CM
Digital Audio
Digital Audio
1A
OPTICAL OUT