8
Putting the bodypack transmitter into operation
Putting the bodypack transmitter into
operation
Inserting the batteries/accupack
For powering the bodypack transmitter, you can either use two 1.5 V AA
size batteries or the rechargeable Sennheiser BA 2015 accupack
(see “Accessories” on page 33).
왘 Open the battery compartment by pushing the two catches in the
direction of the arrows and open the cover .
왘 Insert the two batteries or the accupack as shown above. Please
observe correct polarity when inserting the batteries/accupack.
왘 Close the battery compartment.
The battery compartment cover locks into place with an audible
click.
Charging the accupack
To charge the bodypack transmitter with the BA 2015 accupack (see
“Accessories” on page 33) installed:
왘 Insert the bodypack transmitter into the L 2015 charger (see “Accesso-
ries” on page 33).
The L 2015 charger can only charge the combination BA 2015
accupack/bodypack transmitter. Standard batteries (primary
cells) or individual rechargeable battery cells cannot be charged.
To Next Page
Loading...
