Sensa Core Gluco Spark - Waiting for Blood Glucose Result; Strip Ejection

Waiting for result
4
14:33 05-01-19
mg/dL
Strip Ejection
Do not pull the Gluco Spark test strip away
until you hear one beep or see the timer
starting on your meter screen. this means
you have enough blood and the meter is
reading your glucose.
If after five seconds your meter does not
show a timer starting on the display screen,
the sample may be too small or strip might
be faulty. Replace the strip.
The test result is complete when your blood
glucose test result is shown on the display
screen and you will hear two beeps.
On ave rage, you r reading will display in
5 seco nds.
After getting the result, Press the strip
ejector button near a dustbin so that the
used strip gets released from the meter
and falls in the dustbin.
08