Sensa Core Gluco Spark - Important Notes and Precautions; Caring for Your Meter; Handling and Storage

Avoid getting dirt, dust, blood, water, or any other liquid in the meter's test
strip and data ports. Clean the outside of the meter using a cloth
dampened with one of the following:
Mild detergent/mild soap and water.
70% isopropyl alcohol.
A mix of one part household bleach, nine parts water.
15
Cleaning of your meter
Caring for your meter
Taking care of your meter is very simple. Just follow the guidelines shown below
Do not disassemble your meter. If you have any questions, please contact
your local authorized distributor of Gluco Spark Blood Glucose Monitoring
System.
Please use your meter carefully. Avoid throwing, shaking, or dropping it,
which may damage its internal parts.
Clean the meter’s surface with a soft tissue slightly dampened with water.
Do not use alcohol or abrasive solutions.
Do not wash or pour liquid on the meter.
Important Notes
1.
2.
3.
4.
Never immerse the meter in water or any other liquid.
Important:
Handling & Storage
Handle your meter with care and protect it from direct sunlight or
extremely high or low temperature.
Do not expose your meter and test strips to an environment of high
humidity, such as in bathrooms, kitchens, etc.
Keep your meter free of dust.
It is recommended that you use the carrying case that is designed to
store and protect your Blood Glucose Monitoring System.
Put your system in an appropriate operating environment at least
30 minutes before testing.
1.
2.
3.
4.
5.