Test Strip Port
Insert the top end of
a new Gluco Spark test
strip here. The meter
powers on when you
insert the test strip.
This screen always appears when the meter
is turned on so that you can make sure the
display is working properly. Do not use the
meter if the system check screen does not
match the example here.
Gluco Spark meter and how it works
Displa ys your test
resul t s a n d o t h er
important information.
Display Screen
Previous Readings.
Strip Ejector
Press this button to
release the used
strip after testing.
Apply blood to
sample area at
end of the strip
only.
Exit
(NO) Button
(Yes) Button
03
Carbon Electrode
(for accurate results)
Plasma Etching
(for excellent precision)
Fast Draw Technology
(fast and easy)
Reference Electrode
Sample Application Area
Sample Area
14:33 05-01-19
mg/dL
14:33 05-01-19
To Next Page
Loading...