Test Strip
Sample Area
Test strips may be used only once. Discard used test strips.
You can continue to fill the test strip for up to 60 seconds.
Important:
The cap or vial contains drying agents that may be harmful if inhaled or swallowed and
may cause skin or eye irritation.
Warning:
Important:
The Gluco Spark Meter should only be used with Gluco Spark Test Strips. Using other test
strips with this meter can produce inaccurate results.
Note:
For further information, refer to the Gluco Spark Test Strip package insert.
Apply blood to strip sample area per test.
Important Test Strip Information
The Gluco Spark system has an operating range of 2° to 50°C.
Store the test strip package in a cool, dry place between 0° to 50°C.
Use test strips only within the system operating temperature range.
Keep away from direct sunlight and heat.
Store your test strips in their original vial only; never transfer them to
another vial or any other container.
Never store individual test strips outside the vial.
After removing a Gluco Spark test strip from the vial, immediately close
the vial cap tightly.
With clean, dry hands, you may touch the test strip anywhere when
removing it from the vial or inserting it into the meter.
Do not use test strips beyond the expiration date. This may cause
inaccurate results.
Do not bend, cut, or alter Gluco Spark test strips.
Gluco Spark test strip
05
To Next Page
Loading...