EasyManua.ls Logo

SENSECAP S2120 - Install Battery (Built-in Box)

SENSECAP S2120
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IoT into the Wild
9
Battery schemes
Advantage and disadvantage
3 * 1.5V AA alkaline battery,
built-in battery box
The operating temperature of the sensor depends on the
operating temperature of the battery. If the alkaline battery
is used, the operating temperature range is -20 ~ 60.
3 * 1.5V AA Lithium battery,
built-in battery box
If the alkaline battery is used, the operating temperature
range is -40 ~ 60.
6 * 1.5V AA alkaline battery,
external battery box
It will last twice as long as 3 x batteries.
6 * 1.5V AA alkaline battery,
external battery box
It will last twice as long as 3 x batteries.
Note:
The battery box does not have the charging capability. Therefore, non-rechargeable batteries
are recommended. If you choose a rechargeable battery, you need to take out the battery
and charge it separately after the battery is exhausted.
4.4.1 Install the battery with built-in box
Step 1: Unscrew the battery door at the bottom of weather station.
Step 2: Insert the 3 AA batteries according to the +/- polarity indicated. Then close the battery
door.

Table of Contents

Related product manuals