SENSECAP S2120 - Set the EUI and Key; Set the Packet Policy

IoT into the Wild
23
Parameter
Type
Uplink Interval
Unit: minutes, number from 1 to 1440.
Note:
The SenseCAP portal has a limit on uplink interval: minimum interval is 5 minutes.
The interval using the other platforms ranges from 1 to 1440 minutes.
6.3.3 Set the EUI and Key
The device uses OTAA to join the LoRaWAN network by default. So, it can set the device
EUI and App EUI.
Parameter
Type
Device EUI
16 bits, hexadecimal from 0 ~ F
App EUI
16 bits, hexadecimal from 0 ~ F
App Key
32 bits, hexadecimal from 0 ~ F
6.3.4 Set the Packet Policy
The sensor uplink packet strategy has three modes.