SENSECAP S2120 - Page 43

IoT into the Wild
42
means they may only last for1~2 weeks. A
value of 100 means the battery is sufficient.
3
Hardware and
Software
Version
01010103
01010103 is actually 0x01010103(unsigned
number).
HW.HW-SW.SW
0101: HW 1.1
0103: SW 1.3
4
Measurement
Uplink Interval
000A
000A is actually 0x000A(unsigned number),
whose equivalent decimal value is 10. You will
get the actual value for Measurement Uplink
Interval as 10 minutes.
5
GPS Uplink
Interval
(reserved)
05A0
05A0 is actually 0x05A0(unsigned number),
whose equivalent decimal value is 1440. You
will get the actual value for GPS Uplink
Interval as 1440 minutes.
GPS is used in the customized version. The
common version does not have the GPS
function.
6
Measurements
packet of 01
and 02
0101104300000000000000
02011A000000002702
Please refer to 01/02 packets.
The raw payload (Combined data packet):
010110430000000000000002011A000000002702 03 64
Part
Value
Raw Data
Description
1
Measurements
packet of 01
and 02
0101104300000000000000
02011A000000002702
Please refer to 01/02 packets.
2
Frame ID 03
03
03is the frame ID.
3
Battery Level
64
64 is actually 0x64 (signed number), whose
equivalent decimal value is 100. You will get
the actual value for battery level as 100.
Batteries have only two states: a value of 0
means they may only last for1~2 weeks. A
value of 100 means the battery is sufficient.