senseFly eBee X - Safety Precautions; Propeller and Handling Safety; Pre-Flight Handling and Equipment Checks

Using your eBee X
7 Safety precautions
• Keep clear of the propeller
The propeller spins at high speeds and can be dangerous if it comes into
contact with exposed skin. Always keep all objects and all parts or your
body clear of the propeller when the battery is installed in your eBee X.
• Power the drone off before handling it
Power the eBee X off before picking it up. Never attempt to pick the eBee X
up while the propeller is turning.
• Never attempt to fly without an approved camera
The eBee X is not designed to fly without a camera in its camera bay.
• Never fly with the battery or camera bay exposed
The covers and integration kits protect the drone’s ports and electronics.
• Know how to, and be ready to abort take-off or landing if necessary
There are procedures and buttons in eMotion’s Control Bar that do this. See
Take-off on page 54 and the eMotion user manual.
• Never fly a damaged eBee X. Never fly with any damaged equipment
• Thewings must be correctly attached and the servos properly engaged
See Getting the eBee X ready to fly on page 34.
• The propeller must be correctly attached and in excellent condition
for flight
Never try and start the motor without the propeller. See Getting the eBee X
ready to fly on page 34.
26