EasyManua.ls Logo

senseFly eBee X - Operational Guidelines; Battery, SD Card, and Environment; Flight Restrictions and Collision Avoidance

senseFly eBee X
97 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operational guidelines
8 Operational guidelines
Only use approved senseFly batteries
Only fly with a senseFly battery. Flying with any other battery risks causing
a malfunction and will void your warranty in case of an incident.
Only use approved senseFly SD cards
Only fly with SD cards that have been approved by senseFly.
Always land on a stable, level surface
Do not attempt to land on a steep slope or an area covered with large rocks,
debris or holes. Do not land on a wet surface, soft sand, thick snow, dust,
or mud.
Obey local flight restrictions
Unless authorised with, for example, a waiver from the relevant authority,
do not fly above people, urban areas, near airports or beyond visual line-of-
sight. Do not fly inside or less than 0.5 km (0.3 miles) from restricted zones.
Obey local regulations concerning the distance from pilot to drone. Take
care if flying near people or animals.
Do not fly in high winds
The eBee X must not take off at all if the wind speed exceeds the maximum
allowed for flight. See Weather check on page 33.
Do not fly in bad weather
Do not fly in rain, snow, hail, fog, a sandstorm or dust storm. Avoid icing
conditions.
Avoid collisions
Always make sure there is enough space between the drone’s trajectory,
any obstacles and any other aircraft. Always double check waypoint alti-
tudes and elevation data against the real terrain.
Check drone battery charge level
Make sure you have more than enough for your flight. Land well before the
battery is empty. See Battery care and safety on page 85.
27

Related product manuals