senseFly eBee X - Page 49

Flying the eBee X
If, during flight, eMotion reports that youhavelosttheconnection with yourdrone,
but one or more ground modem LEDs are lit, this indicates a problem with your
computer, the software, or the USB connection. Do one or more of the following:
• Restart eMotion.
• Unplug the USB cable from your computer then plug it back in.
• Unplug the USB cable from your computer then plug it back into another
of your computer’s USB ports.
• Change the USB cable, for example, use a shorter cable.
• Restart your computer.
• Contact senseFly or your reseller.
49