senseFly eBee X - Motor Startup Sequence and Aileron Check

Using your eBee X
Step 2: Start the motor
3x
shake 3x
d
a
n
g
e
r
z
o
n
e
n
o
h
o
l
d
i
n
g
z
o
n
e
shake 3x
motor startup begins
green
solid
status LED:
blue
pulse
status LED:
Shake the eBee X back and forth 3 times longitudinally (within approx. 3 seconds)
to begin the motor power-up sequence.
The power-up sequence has 2 stages:
1. The motor runs at low power for a few seconds and at the same time, the
drone moves its ailerons up and down several times. This is both an auto-
matictest, and an opportunity to visually check the operationofthe ailerons.
Caution: Look carefully at the ailerons as they move. Make sure they
are moving freely and are properly engaged in the servos.
58