PRODUCT INSTRUCTION MANUAL
Page 10 of 35
Part 3 Sensor Mounting
3.1 General
Select a location within the maximum sensor cable length (30 ft) for mounting of the sensor ow cell. If
there is more than 30 ft distance from the electrode to the transmitter, you should purchase a battery-
powered preamplier model PHAMP-1, or use an amplied pH or ORP electrode. Locate sensor away from
pumps, adjustable frequency drive systems, or other sources of high frequency EMI if possible. Refer to the
installation manual for your electrode for mounting requirements.
To Next Page
Loading...
