Sensorex TX100 - Factory Reset

PRODUCT INSTRUCTION MANUAL
Page 26 of 35
Factory Reset Values
9.7 Factory Reset Menu
This menu allows the user to reset all programmed settings back to the factory defaults.
pH Slope and Oset values reset to Ideal
mV Slope and Oset values reset to
Factory Calibrated Values
pH Manual Oset reset to 0
mV Manual Oset reset to 0
Temperature Manual Oset reset to 0
Without TC, Default 25oC or 77oF
Range Mode [ - ] OFF
Range Mode Lo mV reset to -999 mV
Range Mode Hi mV reset to 999 mV
Range Mode Lo pH reset to 0.00
Range Mode Hi pH reset to 13.99
Hold Mode HLd Lr
Limit Mode O.r. OFF
Clean Probe Timer C.P. OFF
Figure 9.7