Page 18 UltraWave Product Guide
Post-mounting procedure
Figure 13 Mounting hardware kit
Figure 14 Post-mounting procedure
mounting bracket
post collar
gear clamp
E4KT0300 post-mounting kit
mounting bracket hardware
one set per UltraWave unit
compression glands
(kit includes two sets)
(4 each: ¼ in. flat washers,
lock washers & ¼ in. X 20 hex nuts)
alignment holes for
5º mounting angle
Pass the gear clamp through the slots
in the post collar.
Attach the mounting bracket assembly
to the UltraWave unit.
To Next Page
Loading...