9
8
DEUTSCHESPAÑOL ITALIANO ENGLISHFRANCIS
Risk of injury due to ejection
of objects. Keep a safety
distance from the machine.
Applied to the frame, well
visible from a distance.
2.4 Stickers and safety labelling
The safety pictograms used on the machine com-
ply with the standard ISO 11684 (“Tractors
and machinery for agriculture and forestry,
powered lawn and garden equipment - General
principles for safety signs and hazard pictorials”).
All the indications provided must be respected
completely to prevent risky situations from turning
into danger, causing
severe injuries to the operator and/or damage to
the surrounding environment (persons, objects
and pets).
Therefore the stickers applied to the machine
regarding Pericolo (Danger), Attenzione (Cau-
tion), Nota (Warning), must be replaced immedi-
ately if damaged or detached.
Read the use and mainte-
nance manual.
Applied to the casing.
Risk of conveying due to
rotary shafts.
Do not approach rotary parts
of the machine.
Applied to PTO shaft linkage
area.
Risk of crushing, shearing.
Do not stop underneath the
machine or suspended parts
of it.
Applied to the casing, espe-
cially on the hood.
Risk of injury by pressurised
fluids. Do not approach
hydraulic pipelines when
pressurised.
Applied to the frame.
Risk of impact.
Forbidden to stand in danger
zone unprotected, even in
case of maintenance.
Applied to PTO shaft linkage
area.
Forbidden to intervene on
moving parts.
Forbidden to remove pro-
tections.
Applied to the frame.
Risk of conveying due to
pulleys, belts or chains. Do
not approach rotary parts
of the machine before they
have stopped.
Applied to pulley protection
Identification of lifting
points.
Applied close to these
points.