EasyManua.ls Logo

Serfas E DASH PLUS 500W - Settings Menu; SOC View (Battery Percentage;Voltage); Trip Reset Function; AL Sensitivity Setting

Serfas E DASH PLUS 500W
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
SERFAS E-BIKE
11
BF-DM-C-DP C18-EN November 2019
DEALER MANUAL FOR DISPLAY
7.8.1.8 “SOC View” Battery view in volt
percent
Press the
or (<0.5S) button to
highlight “SOC View” in the Display settings
menu, and then press (<0.5S) to select.
Then with the or button choose
between “percent” or “voltage “. Once you
have chosen your desired selection, press
the (<0.5S) button to save and exit to the
"Display setting"
7.8.1.9 “TRIP Reset” Reset mileage
Press the
or (<0.5S) button to high-
light “TRIP Reset” in the Display settings
menu, and then press (<0.5S) to select.
Then with the or button choose
between “YES” or “NO”. Once you have
chosen your desired selection, press the
(<0.5S) button to save and exit to the
"Display setting"
7.8.1.10 AL Sensitivity” Automatic
headlight sensitivity
Press the
or (<0.5S) button to high-
light “AL-Sensetivity” in the Display settings
menu, and then press (<0.5S) to select.
Then with the or button choose be-
tween "0" / " 1" / " 2"/ "3" / "4"/ "5"/ "OFF”.
Once you have chosen your desired selection
, press the (<0.5S) button to save and
exit to the "Display setting"
7.8.1.11 “Password”
Press the
or (<0.5S) button to choose
Password in the menu. Then by briefly
pressing (<0.5S) to enter the password
selection. Now again with the or
(<0.5S) buttons highlight “Start Password"
and press the (<0.5S) button to confirm.
Now again using the or (<0.5S)
Button choose between “ON” or “OFF” and
press the (<0.5S) button to confirm.
Now you can input your 4-digit pin code. By
using the
or (<0.5S) button choose
numbers between "0-9". By briefly pressing
the (<0.5S) button you can move on to
the next number.
After entering your desired 4-digit code,
you must re-enter the 4-digits you chose, to
ensure the code is correct.
After selecting a password, the next time
you turn on the system it will ask you to
input your password. Press the
or
(<0.5S) button to select the numbers, Then
press briefly (<0.5S) to confirm.
After entering the wrong number three
times, the system switches off. If you have
forgotten the password, please contact your
retailer.