C
Christopher HardinSep 12, 2025
How to remove an air bubble from a buffer wick in serva Blue?
- GGary MartinezSep 12, 2025
Distribute the buffer solutions evenly by thoroughly rolling the buffer wick.
To Next PageTo Next PageHow to remove an air bubble from a buffer wick in serva Blue?
Distribute the buffer solutions evenly by thoroughly rolling the buffer wick.
Why is there unsufficient sensitivity of staining with SERVAPurple staining in serva Medical Equipment?
Insufficient sensitivity of staining with SERVAPurple can occur if the wrong protocol (for non-backed gels) has been applied, or the solution volumes were too small. Follow the protocol of this HPE Horizon manual which has been optimized for the HPE Flatbed gels.
Essential safety precautions for operating the electrophoresis instrument.
Instructions for placing the base unit and adjusting levelling feet.
Guide to connecting the SERVA HPE™ Cooling Unit (chiller).
Procedure for removing air from the cooling plate for efficient cooling.
Proper procedure for storing the electrode lid to prevent damage.
How to connect the external power supply to the instrument.
Adjusting electrode positions for different gel sizes.
Steps for applying gels to the cooling plate.
How to prepare and apply electrode wicks for electrophoresis.
Procedures for preparing and loading samples onto gels.
Instructions for initiating the electrophoresis run.
Post-electrophoresis procedures including cleaning and detection.
Detailed steps for cleaning the instrument and its components.
Common issues and solutions during the electrophoresis process.
Problems related to scanning the electrophoresis results.
Troubleshooting common artifacts and issues in electrophoresis results.
General| Brand | serva |
|---|---|
| Model | Blue Series |
| Category | Medical Equipment |
| Language | English |