Server Technology switched pro2 - Page 141

Switched PRO2 – User Guide
Using the Command Line Interface (CLI) • 141
add porttotacacs
Adds access to use a connection pass-thru to a specified port to a TACACS+ privilege
level.
Command Syntax
add porttotacacs <port name | id | ALL> <TACACS+ privilege level>
add ptt <port name | id | ALL> <TACACS+ privilege level>
Command Access
Admin level only
add porttouser
Adds access to use a connection pass-thru to a specified port to a local user.
Command Syntax
add porttouser <port name | id | ALL> <local user name>
add ptu <port name | id | ALL> <local user name>
Command Access
Admin level only
bstat
Displays the latest status and metrics for all branches in the system.
Command Syntax
bstat
Command Access
System Monitor access
connect
Redirects the current CLI session to the target port.
Command Syntax
connect <target port>
Command Access
Any access level for command; for user level lower than admin, access must be granted to
a port for successful connection.