Server Technology switched pro2 - Page 142

Switched PRO2 – User Guide
Using the Command Line Interface (CLI) • 142
create group
Creates a new outlet group.
Command Syntax
create group <name>
Command Access
Admin level only
create ldapgroup
Creates a new LDAP group.
Command Syntax
create ldapgroup <name>
Command Access
Admin level only
create ups
Creates a new uninterruptable power supply (UPS).
Command Syntax
create ups <name | ups type |> <hostname>
Parameters
The create ups command uses the following parameters:
hostname
Hostname or IP address of the UPS.
ups type
Selects UPS type from list of manufacturers. (1-11).
Command Access
Admin level only
create user
Creates a new local user.
Command Syntax
create user <name> {password} {verify password}
Command Access
Admin level only
cstat
Displays the latest status and metrics for all cords in the system.
Command Syntax
cstat
Command Access
System Monitor access