Server Technology switched pro2 - Page 183

Switched PRO2 – User Guide
Using the Command Line Interface (CLI) • 183
show email
Shows email configuration values.
Command Syntax
show email
Command Access
Admin level only
Example
Switched CDU: show email
Email/SMTP Configuration
SMTP Host: (not set)
SMTP Port: 25
SMTP Authentication: None with SMTP Username
SMTP Username:
SMTP Password: (not set)
'From' Addr:
'To' Address 1:
'To' Address 2:
Subject ID: [Sentry_60000a]
Email Notifications: disabled
EVENT Messages: enabled
AUTH Messages: disabled
POWER Messages: disabled
CONFIG Messages: disabled
Trend Files: disabled
show energywise
Shows Cisco EnergyWise configuration values.
Command Syntax
show energywise
Command Access
Admin level only
Example
Switched CDU: show energywise
EnergyWise Configuration
EnergyWise Endpoint: disabled
Port: 43440
Domain: (not set)
Refresh Rate: 180
Secret: (not set)