Switched PRO2 – User Guide
Using the Web Interface • 45
Temperature/Humidity Sensor Status
The PRO2 found the sensor and connection is established.
On a fresh reboot, the PRO2 does not find a sensor.
The connection to a previously found sensor is now lost.
Communication loss occurred due to a hardware issue (not loss of communication with the probes).
1
1
The ENV part of the sensor supports two temperature/humidity (T/H) probes as part of the master unit, two T/H probes as part
of the link unit, and the optional EMCU-1-18 (which can support two T/H probes, four contact-closure monitoring points, and one
water sensor). The “No Comm” sensor status is not loss of communication with the probes themselves.
To Next Page
Loading...