Switched PRO2 – User Guide
Using the Web Interface • 46
Environmental Monitor (EMCU) Status
If an EMCU is connected to the PRO2, the Sensors pages will also include monitoring of water, contact closures,
and analog-to-digital (ADC) sensors.
What to look for:
The operating status of all sensors should be Normal and operating within defined thresholds. View the color-coded
graph showing current operating range within thresholds for the ADC.
Water and contact closure sensors can have either Normal or Alarm status – there are no other states or value
ranges.
The ADC sensors can be configured at Configuration > System > Sensors
To Next Page
Loading...