4
Setra Super Count
TM
Operator's Manual
EXPERIMENTATION
1. Display test...
When your scale is first powered on, it automatically runs through a display test lasting about
six seconds, showing all possible segments which might be displayed. The scale next dis-
plays “C nnn g” (where nnn equals the full scale capacity in grams), performs self-diagnostics
to ensure proper operation and then sets itself to zero. A wake up message is always transmit-
ted upon power up. (If a tape printer is connected to the scale, the scale model, capacity and
software version will be printed. If the scale is connected to a computer the wake up message
will be displayed if in the terminal mode. The scale is then ready for use. For best accuracy,
allow the scale to warm up for 5 minutes.
2. Using your scale for the first time...
It is important that you read this Operator’s Manual thoroughly to ensure proper use of your
scale. Nonetheless, experimenting with your scale and its keyboard prior to reading this manual
in its entirety will not harm your scale (provided it is not overloaded) and may actually give you
a better understanding of the instructions in this manual. If you instruct the scale to do some-
thing it is not capable of doing, the scale will respond by displaying the message “UnAbLE”. To
continue experimenting, simply press the clear key.
To Next Page
Loading...
Need help?
General
