44
Setra Super Count
TM
Operator's Manual
Appendix V
Glossary of Terms
ACCURACY
The degree of conformity of a measured value to the true value.
AVERAGE PIECE WEIGHT
The mean weight in a sample of like pieces.
BAUD RATE
The rate at which your scale transmits or receives information to or from a computer or peripheral
device.
DISPLAY HYSTERESIS
The tendency of a scale with a fluctuating reading to stabilize on the most consistent value.
GROSS WEIGHT
The weight of the contents (net weight) combined with the weight of its container (tare weight).
KITTING
Repeatedly removing a given number of pieces for inclusion in a kit; e.g., removing the number of like
transistors necessary to manufacture a radio.
NET WEIGHT
The weight of the contents of a container, without the weight of the container.
PARITY
A bit used to check the validity of the data word.
PRECISION
The degree of reproducibility of an average value derived from multiple measurements usually ex-
pressed as one standard deviation (or one sigma).
REGISTER
A memory location within the scale where specific data is stored.
REPRODUCIBILITY
See PRECISION.
TARE WEIGHT
The weight of a container without its contents.
To Next Page
Loading...
