Setra Super Count
TM
Operator's Manual 53
Appendix VII
Accessories and Options
The following accessories are available for the Setra Super Count. Ask you dealer for current price
information and/or a demonstration.
Part # Description
401160 Dymo Setra 300 Printer - 2.25" wide receipt/label thermal printer. Direct connect for
English only or barcode printing with ScriptCoder or to the AutoCount 200 for
barcoding.
Dimensions: 4"w x 8"l x 6.25"h(100mm x 200 x 160mm).
404530 BATTERY CONNECTOR ASSEMBLY - designed for portability, this option permits
battery operation. Included is an “on-off” switch, external and internal battery charger
and a DC power clip. A battery is NOT included.
404620 BATTERY - this camcorder style lead-acid battery will provide up to twenty-four hours
of scale operation on a full charge. Battery is 12 VDC, 2.3 ampere hours. Use of this
battery is limited to scales equipped with the BATTERY CONNECTOR ASSEMBLY
(Setra part number 404530.)
404150 AUTO COUNT 200 - scale bar code option allows use of the Setra Super Count for
reading and printing bar code labels. Includes a scanning wand.
404520 REMOTE SCALE OPTION - the Remote Scale Option allows the Setra Super Count to
be used for sampling, as well as for displaying weight and count for conventional
strain gage load cell bases. Option includes analog to digital converter and 7 pin
connector. Excites up to four load cells in one base.
404625 TIME/DATE PRINTOUT - for applications requiring a permanent record of the time
and date of each transaction an optional Time/Date feature can be installed that will
automatically transmit this information to a peripheral device each time the print key
is pressed.
404910 SCRIPTCODER LABEL DESIGN & CABLE KIT - this programming option allows
customization of labels to include any alphanumeric information, scale data fields or
ASCII control characters to print any label format including bar codes on thermal
printers.
To Next Page
Loading...
Need help?
General
