Setra Super Count
TM
Operator's Manual 7
DISPLAY MESSAGES
C nnn g Displayed when the scale is powered on and when the reset key is pressed,
this message identifies the scales rated capacity.
bUSY The scale is waiting for a stable reading.
UnAbLE The scale is unable to complete your requested operation. Press the clear key
and select another operation.
FLASHING
DISPLAY The weight on the pan exceeds the capacity of the scale or the scale is under
loaded (the pan or pan support is missing).
OFLO The displayed count or weight exceeds six digits (999,999).
UPdAtE The scale is recalculating the average piece weight to enhance counting accu-
racy.
TARE CLEAr If a value is stored in the tare register when the zero key is pressed, this mes-
sage will appear warning that the tare value has been cleared.
Add nnn PC The scale is requesting an additional number of pieces (nnn) to satisfy mini-
mum accuracy and/or minimum sample size setup requirements.
Sub nnn PC When kitting, the scale is requesting that an additional number of pieces (nnn)
be removed to satisfy minimum accuracy and/or minimum sample size setup
requirements.
To Next Page
Loading...
Need help?
General
